Product Description
A quickshifter lets you shift up and down without touching the clutch. The system reads pressure or movement on your shift lever through a small sensor, and for a fraction of a second either cuts the ignition (going up) or blips the throttle for you (going down), so the next gear engages clean under load. The iQSE Easy is HealTech's version, set up and tuned to your specific bike through the free app.
Key Features
- Setup happens entirely over WiFi through the free phone app, no laptop or cable required.
- One sensor design covers essentially every motorcycle out there, including bikes running a reverse (race) shift pattern.
- Small enough that it won't eat into your under-seat storage.
- You can disable it temporarily right from the app, handy when the bike's going in for service.
- Weatherproof and shock resistant, backed by a 2-year warranty, with firmware updates delivered automatically over WiFi for as long as you own it.
- Size: 50 x 30 x 17 mm (1.9 x 1.2 x 0.6 inches)
- Weight: 47g
Just the electronics in this box. To wire it into your bike you'll also need QSH Harness Kit Only, unless you already have one from before.
Not sure which part number fits your bike? Click the harness kit link above — its fitment search will find the exact one for you.
FAQ
What's included when I buy this?
Just the unit itself, no wiring harness. You'll need the bike-specific harness kit too, sold separately, or already have one from a prior order.
Will it work with my stock exhaust and ECU?
Yes, the iQSE doesn't touch your ECU's fuel or ignition maps. It only intervenes for the split second of the shift.
Which control unit do I need, W1, W2, or W3?
It depends on your bike's ignition type. Click the QSH Harness Kit Only link above and use its fitment search — it'll show you the exact unit and harness combo for your bike.
Does it work for downshifts too, or just upshifts?
Both. Upshifts get an ignition cut, downshifts get an automatic throttle blip, so you get clutchless shifting either direction.
Can I turn it off if I want to shift manually with the clutch?
Yes, the app lets you disable the auto-blip or shift-cut function without unplugging anything.
